The preamp and outer bezel were smashed, and it was not possible to use a replacement bezel due to the locking clips being broken from the preamp case. I hand carved a bezel from German spruce and secured it to the preamp. The freshly made bezel was painted black and a system to access the battery was devised. The guitar also received a thorough clean to remove goo from the large amount of gaffa stuck to it, and a fresh setup.

An LSR roller nut was fitted. The original nut had a very deep slot which required filling with a rosewood piece before the nut could be installed. The LSR nut was slightly wider than the neck and so it was shaved down and polished. The guitar subsequently received a fresh setup.

Had its scratch plate veneered with walnut Burl and the headstock was modified as a 2 tone headstock using figured yarran and a personalised decal was also applied.

Had some binding repairs performed as well as a thorough removal of tarnish and a clean up on metal components, followed by a fresh setup.

The bridge was lifting due to a loose bridge post. The bridge post was refitted and the other 2 bridge posts had some CA wicked in. Further, some holes which were drilled into the body were repaired and the loose strap button was also secured properly.

Jarrah armrests and scratch plates were fabricated and fit onto the wings of the silent guitars for improved player comfort.